AGH430 Air Purifier

Regular price $199.99 USD

Note: We cannot ship this item to the State of California.

H13 Filter

Medical Grade HEPA filter that removes 99.97% of airborne particles

UV-C Sterilization

High energy rays used to neuteralize viruses and bacteria

PM2.5 Sensor

Measures particles 30-1000+ times smaller than a human hair

Auto Mode

Adjusts fan speed based on current air quality level for freshest air

Medical Grade Purification

1Pre-Filter

Trap large particles, pet hair and dust.

2Medical Grade Filter

Remove 99.97% of airborne particles down to 0.1

3Carbon Filter

Eliminate odors and VOCs.

4UV-C Sterilization

Kills airborne viruses and bacteria.

Why is a medical grade H13 HEPA filter so important?

A medical grade H13 HEPA filter removes more fine airborne particles from the air to protect your breathing. A normal HEPA filter removes 99.97% of particles down to 0.3 microns while an H13 HEPA filter removes 99.97% of particles down to 0.1 microns.

Quickly Purifies The Whole Room

The AGH430 is powerful enough to completely clean and recirculate air every 20 minutes in a 60m² space with a CARD of 430M³/H.

Best Places for Use

The AGH430 is adaptable, but some of the best places to use the AGH430 are:

Environments over 60 m².
Critical or high-traffic areas
Living place for allergy sufferers
Enclosed spaces with lots of people
Anywhere you want to breathe fresher air

1. Classrooms and Daycares

2. Offices and Coworking Spaces

3. Gyms & Health Clubs

Automatic Air Quality Indicator

The PM2.5 sensor is constantly air quality to give you fresh air without excessive noise levels. If the air quality in the room changes, the fan speed will automatically adjust to bring the air quality back to a healthy level. Once the air quality is healthy, the fan speed will slow down.

0-12

Fresh & Clean
13-35

Moderate Healthy
36+

Unhealthy

Get Better Sleep

In sleep mode the maximum noise level is a whisper-quiet 22dB so you can sleep without being disturbed.

Sleep mode <22dB

Fan level 1 <28dB

Fan level 3 <35dB

Fan level 5 <49dB

OTHER FEATURES

Five Fan Speeds

If you’re a light sleeper, the max noise level of 22 dB on the low fan speed will allow you to sleep through the night.

Child Lock Function

Press and hold the Fan button for 5 seconds to activate or deactivate the Child Lock Function.

0-24 Hour Timer

The extra long timer allows you to set the unit to power off in 1 hour increments up to 24 hours.

Filter Reset Function

When the replacement icon lights up, it's a reminder to check and change the air filter.

Easy to Replace the Air Filter

1.Power off and unplug before change the filter. Rotate the bottom cover counterclockwise and take out the old filter.Remove the plastic seal from the new filter.